HP 3PAR Application Software Suite for Oracle - Manual (Page 154)

REASON
Before using the rmore_rsync command, all of the volumes within the Remote Copy groups that
are used by the Oracle database should be in Synced status.
SOLUTION
Wait until the specified volume finishes syncing.
MESSAGE ID
1132
SYMBOLIC NAME
RMO_ERROR_RCVV_STOPPED
MESSAGE
3PAR1132: ERROR: Remote Copy volume <name> has been stopped.
REASON
Before using the rmore_rsync command, all of the volumes within the Remote Copy groups that
are used by the Oracle database should be in Synced status.
SOLUTION
If any volumes are in Stopped status, check if the Remote Copy group has been stopped. Make
sure the Remote Copy group is in Started status.
MESSAGE ID
1133
SYMBOLIC NAME
RMO_ERROR_CREATE_GROUPSV
MESSAGE
3PAR1133: ERROR: Could not create group of snapshot volumes.
REASON
Recovery Manager for Oracle calls InForm CLI command creategroupsv to create a virtual
copy for a group of volumes failed.
SOLUTION
Check the log file to see more details. Check the HP 3PAR storage system to see if there is enough
space for virtual copy creation. Make sure all parameters from the configuration file are up to
date. Contact customer support for further investigation.
MESSAGE ID
1134
SYMBOLIC NAME
RMO_ERROR_LUN_NOTAVAIL
MESSAGE
3PAR1134: ERROR: Could not find available LUN from host <name>.
REASON
Failed to find next available vlun number to create a VLUN. The InForm CLI command createvlun
will fail if the error is not corrected.
SOLUTION
Check if the LUN being used exceeds the maximum value. If necessary, delete some unused VLUNs
to make the VLUN available.
154 Troubleshooting