HP 3PAR Application Software Suite for Oracle - Manual (Page 179)

MESSAGE ID
1250
SYMBOLIC NAME
RMO_ERROR_SET_ARCHLOG
MESSAGE
3PAR1250: ERROR: Please explicitly set value for parameter log_archive_dest_n.
REASON
The detail can be found in bug 41996. If there is no explicit value set for this parameter, it could
cause rmora_createdb tasks to fail.
SOLUTION
Set this parameter value explicitly.
MESSAGE ID
1251
SYMBOLIC NAME
RMO_ERROR_RECONFIG
MESSAGE
3PAR1251: ERROR: Please run rmora_config then try again.
REASON
Some parameters have invalid values from the configuration files, or the set up for Recovery
Manager for Oracle is not completed.
SOLUTION
Make sure the RMOra package is installed properly. Make sure the required setup (such as the
SSH set up, refer to the HP 3PAR Recovery Manager for Oracle User Guide for more information)
has completed without errors. Run rmora_config to make sure all the parameters have up-to-date
values.
MESSAGE ID
1252
SYMBOLIC NAME
RMO_ERROR_SYNC_FS
MESSAGE
3PAR1252: ERROR: Could not sync file system <file system name> on host <host name>.
REASON
The system calling fsync() for the specified file system failed.
SOLUTION
Make sure the OS is in valid state on the database server.
MESSAGE ID
1253
SYMBOLIC NAME
RMO_ERROR_REMOUNT_FS
MESSAGE
3PAR1253: ERROR: Could not re-mount file system <file system name> on host <host name>.
REASON
Failed to remount the specified file system.
179