Group subcommand, Syntax, 46 information output by the show subcommand – HP XP Array Manager Software User Manual

Page 101

Advertising
background image

Performance Monitor collects statistics by the two types of storing periods: in short range and in long

range. In short-range monitoring, the monitoring data between 8 hours and 15 days is stored in the SVP,

and in long-range monitoring, the monitoring data up to three months is stored in the SVP. For details on

the two storing periods, see

Understanding Statistical Storage Ranges

” on page 15.

The show subcommand displays the storing period and the gathering interval for these two types of

monitoring data: in short range and in long range. For example, the show subcommand outputs the

following information:

Short Range

From: 2006/10/01 01:00 -

To: 2006/10/01 15:00 Interval : 1min.

Long Range

From: 2006/09/01 00:00 -

To: 2006/10/01 15:00 Interval : 15min.

Short Range indicates the storing period and gathering interval of the monitoring data stored in

short range. Long Range indicates those of the monitoring data stored in long range. When you

run the Export Tool, you can export the monitoring data within these periods into files. If you use the

shortrange or longrange subcommand additionally, you can narrow the term of data to be exported (see

shortrange Subcommand

” on page 112 or

longrange Subcommand

” on page 114).

From indicates the starting time for collecting monitoring data. To indicates the ending time for

collecting monitoring data.
Interval indicates the interval at which the monitoring data was collected (gathering interval). For

example, Interval 15min. indicates that monitoring data was collected at 15-minute intervals.
Storing periods output by the show subcommand is the same as the information displayed in the

Monitoring Term area of the Auto LUN window (see

Figure 46

on page 101).

Figure 46 Information output by the show subcommand

The login command must execute before the show subcommand executes.

group Subcommand

Caution

: The following group commands are not supported in this version.

PortWWN

PPCG

Syntax

groupU{PhyPGU[Short|Long]U[[parity-group-id]:[parity-group-id]][U…]|

PhyLDEVU[Short|Long]U[[parity-group-id]:[parity-group-id]][U…] |

PhyExGU[[exg-id]:[exg-id]][U…]|

PhyExLDEVU[[exg-id]:[exg-id]][U…]|

PhyProcU[Short|Long]|

PhyCSWU[Short|Long]|

PGU][[parity-group-id|V-VOL-group-id|exg-id]:

[parity-group-id|V-VOL-group-id |exg-id]][U…]|

LDEVU[[parity-group-id|V-VOL-group-id|exg-id]:

[parity-group-id|V-VOL-group-id|exg-id]][U…]|

XP24000 Performance Monitor User's Guide

101

Advertising
This manual is related to the following products: