HP XP Array Manager Software User Manual
Page 107
are exported to a ZIP file, the file name will be PG_dat.ZIP. For details on the statistics exported by
this operand, see
on page 77 in “
When you specify variables parity-group-id, exg-id, or V-VOL-group-id, you can narrow the range
of parity groups, external volume groups, or V-VOL groups, whose monitoring data are to be
exported. parity-group-id is a parity group ID. exg-id is an ID of an external volume group.
V-VOL-group-id is V-VOL group ID. The colon (:) indicates a range. For example, 1-1:1-5
indicates parity groups from 1-1 to 1-5. E1-1:E1-5 indicates external volume groups from
E1-1 to E1-5. V1-1:V5-1 indicates V-VOL groups from V1-1 to V5-1. X1-1:X5-1 indicates
V-VOL groups from X1-1 to X5-1.
Ensure that the parity-group-id, exg-id, or V-VOL-group-id value on the left of the colon is smaller
than the parity-group-id, exg-id, or V-VOL-group-id value on the right of the colon. For example,
you can specify PG 1-1:1-5, but you cannot specify PG 1-5:1-1. Also, you can specify
PG 1-5:2-1, but you cannot specify PG 2-1:1-5.
If neither of parity-group-id, exg-id, nor V-VOL-group-id is specified, the monitoring data of all the
parity groups, external volume groups, and V-VOL group will be exported.
LDEVU[[parity-group-id|V-VOL-group-id|exg-id]:
[parity-group-id|V-VOL-group-id|exg-id]][U…]
Use this operand when you want to export statistics about volumes, which are displayed in the
LDEV tab of the Auto LUN window. When statistics are exported to a ZIP file, multiple ZIP files
whose names are beginning with LDEV_ will be output. For details on the statistics exported by
this operand, see
on page 79 in “
When you specify variables parity-group-id, exg-id, or V-VOL-group-id, you can narrow the range
of parity groups, external volume groups, or V-VOL groups, whose monitoring data are to be
exported. parity-group-id is a parity group ID. exg-id is an ID of an external volume group.
V-VOL-group-id is V-VOL group ID. The colon (:) indicates a range. For example, 1-1:1-5
indicates parity groups from 1-1 to 1-5. E1-1:E1-5 indicates external volume groups from
E1-1 to E1-5. V1-1:V5-1 indicates V-VOL groups from V1-1 to V5-1. X1-1:X5-1 indicates
V-VOL groups from X1-1 to X5-1.
Ensure that the parity-group-id, exg-id, or V-VOL-group-id value on the left of the colon is smaller
than the parity-group-id, exg-id, or V-VOL-group-id value on the right of the colon. For example,
you can specify LDEV 1-1:1-5, but you cannot specify LDEV 1-5:1-1. Also, you can specify
LDEV 1-5:2-1, but you cannot specify LDEV 2-1:1-5.
If neither of parity-group-id, exg-id, nor V-VOL-group-id is specified, the monitoring data of all the
volumes (including external volumes and V-VOL groups) will be exported.
PortU[[port-name]:[port-name]][U…]
Use this operand when you want to export port statistics, which are displayed in the Port-LUN
tab of the Auto LUN window. When statistics are exported in a ZIP file, the file name will be
Port_dat.ZIP. For details on the statistics exported by this operand, see
on page 79 in
When you specify variables port-name, you can narrow the range of ports whose monitoring data
are to be exported. port-name is a port name. The colon (:) indicates a range. For example,
CL3-a:CL3-c indicates ports from CL3-a to CL3-c.
Ensure that the port-name value on the left of the colon is smaller than the port-name value on the
right of the colon. Note that the smallest port-name value is CL1-A and the largest port-name value
is CL4-r. The following formula illustrates which value is smaller than which value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify Port CL1-C:CL2-A, but you cannot specify Port CL2-A:CL1-C.
Also, you can specify Port CL3-a:CL3-c, but you cannot specify Port CL3-c:CL3-a.
If port-name is not specified, the monitoring data of all the ports will be exported.
PortWWNU[[port-name]:[port-name]][U…]
XP24000 Performance Monitor User's Guide
107