HP XP Array Manager Software - Manual (Page 106)

If exg-id is not specified, the monitoring data of all the external volume groups will be exported.
PhyExLDEVU[[exg-id]:[exg-id]][U…]
Use this operand when you want to export statistics about volumes in external volume groups,
which are displayed in the Physical tab of the Auto LUN window. When statistics are exported to
a ZIP file, the file name will be PhyExLDEV_dat.ZIP. For details on the statistics exported by this
operand, see Table 11 on page 74 in “ Files to be Exported ” on page 73.
When you specify variables exg-id, you can narrow the range of external volume groups whose
monitoring data are to be exported. exg-id is an ID of an external volume group. The colon (:)
indicates a range. For example, E1-1:E1-5 indicates external volume groups from E1-1 to E1-5.
Ensure that the exg-id value on the left of the colon is smaller than the exg-id value on the right
of the colon. For example, you can specify PhyExLDEV E1-1:E1-5, but you cannot specify
PhyExLDEV E1-5:E1-1. Also, you can specify PhyExLDEV E1-5:E2-1, but you cannot
specify PhyExLDEV E2-1:E1-5.
If exg-id is not specified, the monitoring data of all the external volumes will be exported.
PhyProcU[Short|Long]
Use this operand when you want to export the following statistics, which are displayed in the
Physical tab of the Auto LUN window:
• Usage rates of channel processors
• Usage rates of disk processors
• Usage rates of DRRs (data recovery and reconstruction processors)
When statistics are exported to a ZIP file, the file name will be PhyProc_dat.ZIP. For details on the
statistics exported by this operand, see Table 11 on page 74 in “ Files to be Exported ” on page 73.
You can use the Short or Long option to select the storing period of the monitoring data to be
exported. If you specify Short, the exported file will contain statistics in short range for up to 15
days. If you specify Long, the exported file will contain statistics in long range for up to three
months (that is, up to 93 days). If neither Short nor Long is specified, statistics both in the short
range and long range will be exported.
PhyCSWU[Short|Long]
Use this operand when you want to export the following statistics, which are displayed in the
Physical tab of the Auto LUN window:
• Usage rates of access paths between channel adapters and cache memories
• Usage rates of access paths between disk adapters and cache memories
• Usage rates of access paths between channel adapters and the shared memory
• Usage rates of access paths between disk adapters and the shared memory
• Usage rates of access paths between cache switches and cache memories
• Write pending rates
When statistics are exported to a ZIP file, the file name will be PhyCSW_dat.ZIP. For details on the
statistics exported by this operand, see Table 11 on page 74 in “ Files to be Exported ” on page 73.
You can use the Short or Long option to select the storing period of the monitoring data to be
exported. If you specify Short, the exported file will contain statistics in short range for up to 15
days. If you specify Long, the exported file will contain statistics in long range for up to three
months (that is, up to 93 days). If neither Short nor Long is specified, statistics both in the short
range and long range will be exported.
PGU[[parity-group-id|V-VOL-group-id|exg-id]:
[parity-group-id|V-VOL-group-id|exg-id]][U…]
Use this operand when you want to export statistics about parity groups, external volume groups,
or V-VOL groups which are displayed in the LDEV tab of the Auto LUN window. When statistics
106 Using the Export Tool