HP XP Array Manager Software - Manual (Page 99)

Operands
ip-address
Specifies the IP address of the SVP.
host-name
Specifies the host name of the SVP.
If the host name includes any character that is neither an alphanumeric nor a period, the host
name must be enclosed by double quotation marks (").
Example
The following example specifies the IP address of the SVP as 158.214.127.170.
svpip 158.214.127.170
retry Subcommand
Syntax
retryU[time=m]U[count=n]
Description
The retry subcommand makes settings on retries of export processing.
When an internal error occurs during export processing, the Export Tool stops processing and then retries
export processing. By default, the Export Tool can retry processing up to three times, but you can change
the maximum number of retries by using the retry subcommand.
By default, the interval between one retry and the next retry is two minutes. You can change the interval
by using the retry subcommand.
The retry subcommand must execute before the login subcommand executes.
Operands
time=m
Specifies the interval between retries in minutes.
m is a value within the range of 1 to 59.
If this operand is omitted, the interval between retries is two minutes.
count=n
Specifies the maximum number of retries.
If n is 0, the number of retries is unlimited.
If this operand is omitted, the maximum number of retries is 3.
Example
If the following command file is used, the interval between retries is five minutes and the maximum
number of retries is 10.
XP24000 Performance Monitor User's Guide 99