HP LaserJet 5100 Printer series - Manual (Page 149)

ENWW
Control Panel Menus B-13
PAGE PROTECT=
AUTO AUTO
ON This item appears only after a 21 PAGE TOO
COMPLEX, PRESS GO TO CONTINUE
message displays (page 88).
Memory Enhancement technology (MEt)
attempts to guarantee that all pages will print.
If the page does not print, turn
PAGE PROTECT
to ON . This might increase chances of a 20
INSUFFICIENT MEMORY, PRESS GO TO
CONTINUE
message. If this occurs, simplify the
print job or install additional memory
(page C-1).
CLEARABLE
WARNINGS=JOB JOB
ON Set the amount of time that a clearable warning
is displayed on the printer’s control panel.
JOB : Warning messages display on the control
panel until the end of the job from which they
were generated.
ON : Warning messages display on the control
panel until [Go] is pressed.
AUTO CONTINUE=
ON ON
OFF Determine how the printer reacts to errors.
ON : If an error occurs that prevents printing, the
message will display, and the printer will go
offline for 10 seconds before returning online.
OFF : If an error occurs that prevents printing,
the message will remain on the display and the
printer will remain offline until
[Go] is pressed.
If the printer is on a network, you will probably
want to turn
AUTO CONTINUE to ON .
TONER
LOW=CONTINUE CONTINUE
STOP Determine how the printer behaves when toner
is low. The
TONER LOW message will first
appear when the print cartridge is almost out
of toner. (About 100 to 300 sheets can still be
printed.)
CONTINUE : The printer will continue to print
while the TONER LOW message is displayed.
STOP : The printer will go offline and wait for
further action.
For more information, see page 70.
Configuration Menu (Continued)
Item Values Explanation