HP LaserJet 5100 Printer series - Manual (Page 49)

ENWW
Chapter 2: Printing Tasks 41
Loading Envelopes in Tray 1
1 Open Tray 1 and pull out the tray
extension. If the envelopes are
longer than 9 inches (229 mm), flip
open the second tray extension.
2 Open the rear output bin and pull out
the tray extension. (This reduces
envelope curl and wrinkling.)
3 Load up to 10 envelopes in the
center of Tray 1 with the
side-to-be-printed facing up, and
the postage-end toward the front of
the tray. Slide the envelopes into the
printer as far as they will go without
forcing them.
4 Adjust the guides to touch the
envelope stack without bending the
envelopes. Make sure the
envelopes fit under the tabs on the
guides.