HP LaserJet 5100 Printer series - Manual (Page 81)

ENWW
Chapter 3: Printer Maintenance 73
Cleaning the Printer
Before beginning these steps, turn the
printer off and unplug the power cord.
1 Open the top cover and remove the
print cartridge.
WARNING!
Avoid reaching too far into the printer.
The adjacent fusing area might be hot!
Caution
To prevent damage to the print
cartridge, do not expose it to light for
more than a few minutes.
2 Wipe any dust or dirt off the paper
feed guides (shaded areas) with a
dry, lint-free cloth.
Note
If toner gets on your clothing, wipe it off
with a dry cloth and wash clothing in
cold water. (Hot water sets toner into
fabric.)
3 Using the green handles, lift the
paper access plates and wipe off
any residue with a dry, lint-free cloth.
4 Close the paper access plates,
replace the print cartridge, close the
top cover, plug in the power cord,
and turn the printer on.