HP LaserJet 5100 Printer series - Manual (Page 21)

ENWW
Chapter 1: Printer Basics 13
Control Panel Keys
Key Function
[Go] • Places the printer either online or offline.
• Prints any data residing in the printer’s buffer.
• Allows the printer to resume printing after being offline. Clears most
printer messages and places the printer online.
• Allows the printer to continue printing with an error message such as
TRAY x LOAD [TYPE] [SIZE] or UNEXPECTED PAPER SIZE .
• Confirms a manual feed request if Tray 1 is loaded and TRAY 1
MODE=CASSETTE has been set from the Paper Handling Menu in the
printer’s control panel.
• Overrides a manual feed request from Tray 1 by selecting paper from the
next available tray.
• Exits the control panel menus. (To save a selected control panel setting,
first press [Select] .)
[Cancel Job] Cancels the print job that the printer is processing. The time it takes to cancel
depends on the size of the print job. (Press it only once.)
[Menu] Cycles through the control panel menus. Press the right end of the button
to move forward or the left end of the button to move backward.
[Item] Cycles through the selected menu’s items. Press the right end of the button
to move forward or the left end of the button to move backward.
[- Value +] Cycles through the selected menu item’s values. Press [+] to move forward
or [-] to move backward.
[Select] • Saves the selected value for that item. An asterisk (*) appears next to the
selection, indicating that it is the new default. Default settings remain
when the printer is switched off or reset (unless you reset all factory
defaults from the Resets Menu).
• Prints one of the printer information pages from the control panel.