HP MPX200 Multifunction Router - Manual (Page 156)

Admin
Opens or closes an administrator (Admin) session. You must be in an Admin session to execute
commands that change the router configuration. An inactive Admin session times out after 15
minutes.
Admin session Authority
start (or begin)end (or stop)cancel admin Syntax
Opens the Admin session. start (or
begin )
Keywords
Closes the Admin session. The logout, shutdown, and reset
commands also end an Admin session. end (or
stop )
Terminates an Admin session opened by another user. Use this
keyword with care because it terminates the Admin session without
warning the other user and without saving pending changes. cancel
NOTE: Closing a Telnet window during an Admin session does not release the session. When
using Telnet, you must either wait for the Admin session to time out, or use the admin cancel
command.
Example: The following example shows how to open and close an Admin session:
MPX200 <1> #> admin start
Password : ******
MPX200 <1> (admin) #>
.
.
.
MPX200 <1> (admin) #> admin end
MPX200 <1> #>
156 Command reference