HP MPX200 Multifunction Router - Manual (Page 96)

3. Click Done to finish.
Figure 88 iSCSI Persistent Reservation Setup
Each cluster is required to have its own value, and each node of a single cluster must have its own
value. For example, Cluster A could have the default setting of AABBCCCCBBAA.
Table 14 (page
96) shows possible node settings.
Table 14 Node settings
Value Node
1 Node 1
2 Node 2
3 Node 3
4 Node 4
When the HP Full Featured DSM for P6000 EVA is installed, Persistent Reservation is set in the
registry by default. For more information on the HP DSM, see
http://h20000.www2.hp.com/
bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&
docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492
Microsoft Cluster Server for Windows 2008
iSCSI Failover clustering is supported on the HP MPX200 Multifunction Router. For more information,
see
http://technet.microsoft.com/en-us/library/cc754482.aspx .
Requirements
•
Operating system: Windows Server 2008 Enterprise, SP2, R2, x86/x64
•
Firmware: Minimum version—3.1.0.0, released November 2009
96 MPX200 iSCSI configuration rules and guidelines