HP MPX200 Multifunction Router - Manual (Page 94)

Presenting LUNs to the QLogic iSCSI initiator
To present LUNs to the QLogic iSCSI initiator:
1.
Follow the procedure in Step 4 to:
•
Create an iSCSI host.
•
Present LUNs to the iSCSI host.
2. On the iSCSI HBA tab ( Figure 86 (page 94) ), verify that the QLogic iSCSI HBA is connected
to the iSCSI LUNs in SMS under the HBA iSCSI port.
Figure 86 iSCSI HBA port connections
Use the Microsoft iSCSI initiator services to manage the iSCSI target login and LUN
load-balancing policies.
Installing the HP MPIO Full Featured DSM for P6000 EVA
Follow the procedure in the Installation and Reference Guide, available at http://
h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492
.
After installing the HP MPIO Full Featured DSM for P6000 EVA, open Computer Management to
view and control the iSCSI LUNs (
Figure 87 (page 95) ).
94 MPX200 iSCSI configuration rules and guidelines