HP StorageWorks 2.140 Director Switch - Manual (Page 166)

SANtegrity Security Center 164
Access the SANtegrity Security Center by clicking the Security tab or pressing F8 on the main
window. In order to use the Security Center, the user must have Security Administrator privilege. If
not, the Security tab is hidden.
Additional information about the components of the Security window follows:
• The upper left part of the Security window shows the Fabrics list. All discovered fabrics are listed
by their WWNs with their operational status icons on the left side.
• The upper right part of the Security window displays the main working area, where the Security
Administrator configures the authentication security settings. The main working area is divided
into two parts:
• The upper part is the Authentication Product Configuration table, which contains a summary
of security-related values for each switch in a fabric.
• The lower part is a tabbed pane containing a set of five tabs for completing security
configuration tasks.
• The lower left part of the Security window displays the server Master Log; the lower right part of
the window displays the Security Log.
• The Security tab and Security Log are only available to users with Security Administrator
privileges.
• Change the default size of the display by placing the cursor on the divider until a double arrow
is displayed. Click and drag the adjoining divider to resize the window. You can also show or
hide an area by clicking the left or right arrow on the divider.
• On the toolbar, the Display By option and the Search Box option are disabled.