HP StorageWorks 2.140 Director Switch - Manual (Page 228)

Informational and error messages 232
You must download the
HAFM client via the web
install.
An attempt was made to
download the HAFM
application to a remote
workstation (client) using
an improper procedure.
Download a compatible version of
the HAFM application to the
remote workstation (client) using
the web install procedure.
Zones configured with
port numbers are ignored
in Open Fabric Mode.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
WWNs.
Informational message only–no
action is required.
Zones must be defined
before creating a zone
set.
You cannot create a zone
set without any zones
defined for HAFM.
Define zones using the New Zone
dialog box.
Zoning by port number is
ignored in Open Fabric
Mode.
While in Open Fabric
mode, zones configured
using port numbers are
enforced through
WWNs.
Informational message only–no
action is required.
Zoning by port number is
not supported in Open
Fabric Mode.
You cannot specify an
item for zoning by port
number if HAFM is in
Open Fabric Mode.
Either define zones by WWN of
device or change to Homogeneous
Fabric mode in the Configure
Operation Mode dialog box of the
Element Manager.
Zoning name already
exists.
Duplicate zone names
are not allowed in the
zoning library.
Modify (to make it unique) or
delete the duplicate zone name.
Table 30 HAFM Messages (continued)
Message Description Action