HP StorageWorks 2.140 Director Switch - Manual (Page 240)

Informational and error messages 244
Feature not supported.
The ‘product name’ must
be running version
05.00.00 or higher.
The firmware version on
the hardware product
(switch or director) is
lower than 05.00.00.
This message is displayed
if the optional Open
Trunking feature is
installed.
Install firmware version 5.00.00 or
higher on the hardware product.
Field cannot be blank. The data box requires an
entry and cannot be left
blank.
Enter appropriate information in
the Data box.
Field has exceeded
maximum number of
characters.
The maximum number of
data entry characters
allowed in the box was
exceeded.
Enter the information using the
prescribed number of characters.
File transfer aborted. You aborted the file
transfer process.
Information message only.
File transfer is in progress. A firmware file is being
transferred from the
HAFM appliance hard
drive, or a data collection
file is being transferred to
a CD.
Informational message only—no
action is required.
Firmware download
timed out.
The director or switch did
not respond in the time
allowed. The status of the
firmware install operation
is unknown.
Retry the operation. If the problem
persists, contact the next level of
support.
Firmware file I/O error. A firmware download
operation aborted
because a file I/O error
occurred.
Retry the operation. If the problem
persists, contact the next level of
support.
Firmware file not found. The firmware version is
not installed (or was
deleted) from the
firmware library at the
HAFM appliance.
Add the firmware version to the
library and retry the operation.
Table 31 Element Manager messages (continued)
Message Description Action