HP StorageWorks 2.140 Director Switch User Manual

Page 215

Advertising
background image

HA-Fabric Manager user guide 219

Cannot modify product.

The selected product

cannot be modified.

Verify the HAFM appliance-to-

product link is up. If the link is up:

The HAFM appliance can be

busy.

Another Element Manager

instance can be open.

You cannot have permission to

modify the product.

Cannot perform

operation. Fabric is

unknown.

This message is displayed

if no switches in the fabric

are connected to the

HAFM appliance.

Ensure at least one fabric-attached

switch or director has an Ethernet

connection to the HAFM appliance

and retry the operation.

Cannot perform

operation. The list of

attached nodes is

unavailable.

This message is displayed

when attached nodes are

unavailable and you

attempt to modify a zone

or create a new zone.

Verify an attached node is

available and retry the operation.

Cannot retrieve current

SNMP configuration.

The current SNMP

configuration could not

be retrieved.

Try again. If the problem persists,

contact the next level of support.

Cannot save current

SNMP configuration.

The current SNMP

configuration could not

be saved.

Try again. If the problem persists,

contact the next level of support.

Cannot set write

authorization without

defining a community

name.

An SNMP community

name has not been

configured.

Enter a valid community name in

the Configure SNMP dialog box.

Cannot show zoning

library. No fabric exists.

You cannot show the

zoning library if no fabric

exists. You must have

identified a switch or

director to the HAFM

application for a fabric to

exist.

Identify an existing switch or

director to the HAFM application

using the New Product dialog box.

Click OK to remove all

contents from log.

This action deletes all

contents from the selected

log.

Click OK to delete the log contents

or Cancel to cancel the operation.

Connection to

management server lost.

The connection to the

remote HAFM appliance

has been lost.

Log in to the HAFM appliance

again through the HAFM Log In

dialog box.

Table 30

HAFM Messages (continued)

Message

Description

Action

Advertising