HP StorageWorks 2.140 Director Switch User Manual

Page 218

Advertising
background image

Informational and error messages

222

Error removing zone or

zone member.

The HAFM application

encountered an internal

error.

Try the operation again. If the

problem persists, contact the next

level of support.

Error transferring files

< message >.

An error occurred while

transferring files from the

PC hard drive to the

HAFM application. The

message varies,

depending on the

problem.

Try the file transfer operation

again. If the problem persists,

contact the next level of support.

Fabric Log will be lost

once the fabric unpersists.

Do you want to continue?

When you unpersist a

fabric, the corresponding

fabric log is deleted.

Click Yes to unpersist the fabric or

No to cancel the operation.

Fabric member could not

be found.

A fabric member does not

exist when the application

prepared to find a route,

find a route node, or

gather route information

on that fabric member.

Ensure the product is incorporated

into the fabric and retry the

operation. If the problem persists,

contact the next level of support.

Fabric not persisted.

You attempted to refresh

or clear the log, after a

fabric was unpersisted.

When you unpersist a

fabric, the corresponding

fabric log is deleted.

Click OK to continue. Ensure the

fabric is persisted before

attempting to refresh or clear the

Fabric Log.

Field cannot be blank.

The data box requires an

entry and cannot be left

blank.

Enter appropriate information in

the data box.

File transfer aborted.

You aborted the file

transfer process.

Verify the file transfer is to be

aborted, then click OK to continue.

HAFM error <error

number 1 through 8 >.

The HAFM application

encountered an internal

error (1 through 8

inclusive) and cannot

continue operation.

Contact the next level of support to

report the problem.

Management server

could not log you on.

Verify your username and

password.

An incorrect username or

password (both case

sensitive) was used while

attempting to log in to the

HAFM application.

Verify the username and password

with the customer’s network

administrator and retry the

operation.

Table 30

HAFM Messages (continued)

Message

Description

Action

Advertising