HP LaserJet 5100 Printer series - Manual (Page 111)

ENWW
Control Panel Menus B-5
OVERRIDE A4/
LETTER=NO NO
YES Choose YES to print on letter size paper when
an A4 job is sent, but no A4 size paper is loaded
in the printer (or to print on A4 size paper when
a letter job is sent, but no letter paper is loaded
in the printer).
CONFIGURE FUSER
MODE MENU=NO NO
YES Configure the fuser mode associated with each
paper type. (This is only necessary if you are
experiencing problems printing on certain
paper types.)
NO : The fuser mode menu items are not
accessible.
YES : Additional items appear (see below).
Note
To see the default fuser mode for each paper
type, select
YES , scroll back to the Information
Menu, and print a menu map (page B-3).
[TYPE]=
NORMAL NORMAL
LOW
HIGH
VELLUM This item appears only when CONFIGURE
FUSER MODE MENU=YES . Most paper types
are set to NORMAL by default.
The exceptions are as follows:
ROUGH=HIGH
VELLUM=VELLUM
For a complete list of supported paper types,
see page A-5.
Paper Handling Menu (Continued)
Item Values Explanation