HP LaserJet 5100 Printer series - Manual (Page 85)

ENWW
Chapter 4: Problem Solving 77
5
Does the printer select the proper trays and
output locations?
For other
problems,
check the
Contents, the
Index, or
the printer
software help.
YES
NO
The printer
pulls from the
wrong tray.
A message
other than
READY is
displayed.
Make sure paper trays are correctly
configured for paper size and type
(page 47). Print a configuration page
to see current tray settings
(page 80).
If you do not want to print from Tray 1,
remove any paper loaded in the tray
or change the
TRAY 1 MODE setting
to CASSETTE (page 45). By default,
paper loaded in Tray 1 will be printed
first.
If you want to print from Tray 1, but
cannot select the tray from a
software application, see page 45.
Go to page 63.
Make sure the tray selection (or
paper type) in the printer driver or
software application is set correctly.
(The printer driver and software
application settings override the
printer’s control panel settings.)