HP LaserJet 5100 Printer series - Manual (Page 73)

ENWW
Chapter 4: Problem Solving 65
MEMORY SHORTAGE
JOB CLEARED The printer did not have enough free memory to print the entire job.
The remainder of the job will not print and will be cleared from
memory.
Press [Go] to continue.
Change the Resource Saving setting from the printer’s control panel
(page C-5) or add more memory to the printer (page C-1).
MEMORY SHORTAGE
PAGE SIMPLIFIED The printer had to compress the job in order to fit it in available
memory. Some data loss might have occurred.
Press [Go] to continue.
You might want to add more memory to the printer (page C-1).
MOPY PAGE TOO
COMPLEX
alternates with
PRESS GO TO
CONTINUE
The data (dense text, rules, raster or vector graphics) sent to the
printer was too complex.
Press [Go] to print the transferred data. (Some data might be lost.)
If this message appears often, simplify the print job.
OFFLINE Press [Go] to place the printer online.
OUTPUT BIN FULL
CLEAR (BIN nnn)
n (bin name)
The output bin is full and needs to be emptied.
PERFORM PRINTER
MAINTENANCE Hewlett-Packard recommends that only HP-authorized service
technicians service the printer. However, you can perform most
routine maintenance. When the
PERFORM PRINTER MAINTENANCE
message appears on the control panel, you will need to purchase a
printer maintenance kit and install the new parts.
RESEND UPGRADE There is an error in the printer’s flash firmware. Resend a valid
firmware image.
TRAY x EMPTY Load the empty tray ( x ) to clear the message.
If you do not load the specified tray, the printer will continue printing
from the next available tray, and the message will continue to display.
Printer Messages (Continued)
Message Explanation or Recommended Action