HP LaserJet 5100 Printer series - Manual (Page 115)

ENWW
Control Panel Menus B-9
X DIMENSION=
12.28 INCHES
(110V printers)
or 312 MILLIMETERS
(220V printers)
3.00 to 12.28
INCHES
(110V printers)
or
76 to 312
MILLIMETERS
(220V printers)
This item appears only when CONFIGURE
CUSTOM PAPER=YES . Select the
dimension to be fed into the printer.
Note
Heavy paper and very small or very large
custom-size paper should be printed from
Tray 1 to the rear output bin. Open the rear
output bin to use it (page 22).
Y DIMENSION=
18.50 INCHES
(110V printers)
or
470 MILLIMETERS
(220V printers)
5.00 to 18.50
INCHES
(110V printers)
or
127 to 470
MILLIMETERS
(220V printers)
This item appears only when CONFIGURE
CUSTOM PAPER=YES . Select the other
dimension.
Note
Heavy paper and very small or very large
custom-size paper should be printed from
Tray 1 to the rear output bin. Open the rear
output bin to use it (page 22).
ORIENTATION=
PORTRAIT PORTRAIT
LANDSCAPE Determine the default orientation of print on
the page.
Note
It is best to set the page orientation from the
printer driver or software application.
(Driver and software settings override
control panel settings.)
FORM=60 LINES
(110V printers)
or
64 LINES
(220V printers)
5 to 128 Sets vertical spacing from 5 to 128 lines for
default paper size. Press
[-Value+] once to
change the setting by increments of 1, or
hold down
[-Value+] to scroll by increments
of 10.
PCL FONT
SOURCE=INTERNAL INTERNAL
SOFT
SLOT 1, 2,
or 3
INTERNAL : Internal fonts.
SOFT : Permanent soft fonts.
SLOT 1, 2, or 3 : Fonts stored in one of
the three DIMM slots.
PCL FONT NUMBER=
0 0 to 999 The printer assigns a number to each font
and lists them on the PCL Font List
(page 82). The font number appears in the
Font # column of the printout.
PCL FONT PITCH=
10.00 0.44 to 99.99 This item might not appear, depending on
the font selected. Press
[-Value+] once to
change setting by increments of .01 for
pitch, or hold down
[-Value+] to scroll by
increments of 1.
Printing Menu (Continued)
Item Values Explanation