HP 3PAR Service Processors - Manual (Page 14)

5 Notify
Overview
Click Notify to display a list of all notification records and user profiles that have been created on
the SP.
•
Notification is a subscription-based activity. If you want to be notified for a particular product,
site, or symptom, you must add a notification record, which defines how and when you want
to be notified.
•
You can selectively suppress notifications by creating a suppression record, which inhibits
notification based on a user-defined symptom match.
•
User profiles define the email addresses, prime shifts, and affiliations for each user. You can
edit
, delete , or add profiles as desired.
•
A user profile must be established before a notification record can be created for that user.
•
The Quick Setup link provides a quick method to create up to three user profiles and default
notification records.
•
To use local notification, you must configure the mailhost and enable local notification. You
can perform these operations from the Setup menu.
Adding a User Profile with Quick Setup
1. Enter the first name, last name, and email address for a user to be set up.
NOTE: You can add users at any time. For more information, see Adding user profiles .
2. Select the appropriate user Category from the selection list.
3. Enter the user company as appropriate.
4. Click Add User Profile and Notification Record.
Adding a Notification Record
1. In the left navigation pane, click Notify.
2. Click Add Record at the top of the Notification list.
3. From the selection list, select the user for which this notification is intended.
NOTE: If the user is not in the selection list, add a user profile for that user, and then add a
notification record.
4. For Notification Record Type, click Normal.
14 Notify