HP 3PAR Service Processors - Manual (Page 20)

7 Setup
Overview
The Setup module provides access to utilities that are used to configure applications within the
SPOCC interface.
System Support Information
By clicking the System Support Information link a user can display and update contact information.
Click Next to view additional screens or click Back to return to the previous screen. Click Save to
save any changes or click Cancel to return to the Setup page.
Configuring a Mailhost
1. In the left navigation pane, click Setup.
2. Under Notification Maintenance Utilities, click the Configure Mailhost link.
3. The form indicates whether a mailhost is already configured. If a mailhost is already configured,
update or remove the current configuration as required. If a mailhost is not already configured,
add the mailhost configuration:
a.
Enter the IP Address of the mailhost where this SP is to relay email.
b. Enter the Domain Name of the mailhost.
NOTE: The domain name is not the fully qualified name of the mailhost (such as
mailhost.3par.com or mailhost.west.3par.com) but rather the associated domain name
(such as 3par.com or west.3par.com).
c. Configure the optional fields as needed:
•
From ID Override—Override any application-specific "From Ids", and make this the
default "From Id" on all mail from this SP.
•
Additional Send-To Addresses—Add any additional email addresses required on all
mail sent from this SP. This is a comma-delimited setting.
4. Click Add Mailhost or Update Mailhost as appropriate to configure the mailhost.
Enabling and Disabling Local Notification
By clicking the Enabling/Disabling Local Notification link, an authorized user can toggle the local
notification setting between “enabled” and “disabled.”
NOTE: Enabling local notification provides access to the Advanced Configuration Menu.
Advanced Configuration Menu
Items on this menu are optional, but they do provide the ability to modify several local notification
attributes.
•
Edit Sites Table
This function provides general table maintenance capabilities (such as add, update, inquire,
and delete) for the database Sites table. This table is generally used to update site information
that might pertain to a specific customer (for example, site number and site name).
The base record cannot be deleted; however, additional sites can be added. Note that installed
products have to be manually added or transferred to a site by using the Edit Product Table
option on the Advanced Configuration Menu.
•
Edit Product Table
20 Setup