Editing an existing notification record, Deleting an existing notification record, Adding a symptom notification record – HP 3PAR Service Processors User Manual
Page 15
5.
Click Select. The Add Notification screen is displayed.
a.
Select the desired notification type:
•
Product
•
Site
b.
Select the desired duration for this notification record.
NOTE:
The default duration is from the current date to ten years from the current date.
c.
Select the desired notification means for each of the following conditions.
NOTE:
Make sure that the user profile is set up for the desired means.
•
Prime Shift - High Urgency
•
Prime Shift - Low Urgency
•
Off-Shift - High Urgency
•
Off-Shift - Low Urgency
d.
Click Submit. You are returned to the notification list, which displays the notification
record you just created.
Editing an Existing Notification Record
1.
Click Edit
for the notification record you want to edit.
2.
Make the desired changes.
3.
Click Submit. You are returned to the notification list, which displays the notification record
you just edited.
Deleting an Existing Notification Record
1.
Click Delete
for the notification record you want to delete.
2.
Confirm that you want to delete the record.
Adding a Symptom Notification Record
1.
In the left navigation pane, click Notify.
2.
Click Add Record
at the top of the notification list.
3.
From the selection list, select the user for which this notification is intended.
NOTE:
If the user is not in the selection list, add a
for that user, and then add a
notification record.
4.
For the Notification Record Type, click Symptom.
Editing an Existing Notification Record
15