HP Color LaserJet Enterprise CM4540 MFP series - Manual (Page 320)

4. If paper is jammed as it enters the output bin,
remove the fuser and gently pull the paper
downward to remove it.
5. Paper could be jammed inside the fuser where
it would not be visible. Grasp the fuser
handles, lift up slightly, and then pull straight
out to remove the fuser.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
6. Open the jam-access door. If paper is jammed
inside the fuser, gently pull it straight up to
remove it. If the paper tears, remove all paper
fragments.
CAUTION: Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they
have cooled.
300 Chapter 14 Solve problems ENWW