HP Secure Key Manager - Manual (Page 178)

Figure 96 Viewing the FIPS Status Report: normal
The following table describes the components of the FIPS Status Server Settings section.
Table 77 FIPS Status Report components
Description Component
Displays the model of your device. Product
The Unit ID is composed of alphanumeric characters. Unit ID
The hostname is the name used to identify the SKM on the network. Hostname
This field specifies the IP address(es) on which the KMS Server is enabled on the SKM. IP Address(es)
Indicates the current state of the device, either normal or error. When the device is
in an error state, functionality is dramatically limited: you will not be able to commu-
nicate with the device using the CLI, the Management Console, or the XML Interface.
Limited access to the device via the serial console will be supported. Reboot the device
to restore functionality. If the problem persists, contact customer support.
Device State
Indicates if the device is FIPS-compliant. FIPS Mode Enabled
Using the Management Console 178