HP Secure Key Manager - Manual (Page 209)

Figure 117 Viewing the Allowed Client IP Addresses section
The following table describes the components of the Allowed Client IP Addresses section.
Table 98 Allowed Client IP Addresses section components
Description Components
Enter IP addresses in the following formats:
• single IP address (192.168.1.60)
• a range of IPs (192.168.1.70 - 192.168.1.80)
• an IP and subnet (192.168.100.0/255.255.255.0)
• an IP and subnet in CIDR format (192.168.200.0/24)
IP Address, Range or
Subnet
Select to grant access to the KMS Server. KMS Server
Select to grant access to the Management Console. Web Administration
Select to grant access to the CLI. SSH Administration
Click Edit to modify an existing IP address entry. Edit
Click Add to add a new IP address. Add
Click Delete to remove an IP address. Delete
NOTE:
When updating this feature from the Management Console, the system ensures that the current
administrator IP address maintains its web administration permissions. When updating this feature
from the CLI, the system ensures that the active SSH administration permissions remain intact.
Configuring SNMP
The Simple Network Management Protocol (SNMP) enables you to manage network performance
and find and solve network problems as they arise. You can configure an SKM to provide SNMP
data from the SNMP Configuration page. You can access the SNMP Configuration page from the
navigation bar by selecting the SNMP icon in the Configuration folder. This chapter contains the
following topics:
• SNMP Overview
• The SNMP Configuration Page
• SNMP Procedures
• Enterprise MIB Overview
Secure Key Manager 209