HP Secure Key Manager - Manual (Page 308)

• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• no ip authorization allowed
• show ip authorization allowed
Related com-
mand(s)
show ip authorization allowed – display the IP authorization settings for all authorized IP addresses.
hostname# show ip authorization allowed
1. IP Address, Range, or Subnet: 1.1.1.2
KMS Server: yes
Web Administration: no
SSH Administration: no
2. IP Address, Range, or Subnet: 192.168.1.129
KMS Server: yes
Web Administration: yes
SSH Administration: yes
NOTE:
You can view the settings for a particular IP address by passing in the index number
of the IP address as a parameter in the show ip authorization allowed command.
You might find it helpful to use the show ip authorization allowed command to find
the appropriate index number.
Syntax
• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• no ip authorization allowed
• show ip authorization
Related com-
mand(s)
show static route – view the static route settings on the SKM.
hostname# show static route Syntax
• static route
• no static route
Related com-
mand(s)
static route – configure a static route on the SKM.
hostname (config)# static route
Enter the destination IP address: 10.0.0.0
Enter the subnet mask: 255.0.0.0
Enter the gateway: 192.168.200.2
Available interfaces:
1. Ethernet #1
2. Ethernet #2
Enter the interface (1-2):
Static route successfully added.
Syntax
Using the Command Line Interface 308