HP Secure Key Manager - Manual (Page 313)

NOTE:
When you execute the edit station command, the system prompts you to provide the
new SNMP management station information. In the example shown here, the system
prompts contain the existing value in brackets. For example, if presented with the
prompt
Enter a number (1 - 3) [2]:
the value in brackets (in this case 2) represents the existing value.
hostname (config)# edit station <station number>
Manager Type:
1: SNMPv1
2: SNMPv2
3: SNMPv3
Enter a number (1 - 3) [2]:
Trap Type:
1: Trap
2: Inform
Enter a number (1 - 2) [1]:
Hostname or IP [default]:
Port [162]:
Manager Community [company]:
Username [security]:
Security Level:
1: None
2: noAuth, noPriv
3: auth, noPriv
4: auth, priv
Enter a number (1 - 4) [2]:
Auth Protocol:
1: None
2: MD5
3: SHA
Enter a number (1 - 3) [1]:
Auth Password:
Syntax
• show station
• station
• no station
Related com-
mand(s)
no community – remove a community from the system SNMP configuration.
hostname (config)# no community <community name> Syntax
• community
• edit community
• show community
Related com-
mand(s)
no snmp username – delete an existing SNMPv3 username.
Secure Key Manager 313