HP Secure Key Manager - Manual (Page 312)

edit community – edit a community.
hostname (config)# edit community <community name>
Enter your changes to the community public below.
Press enter to keep the current value for a community property.
Community Name [public]:
Community Source IP [192.168.1.40/255.255.255.0]:
Enterprise MIB Access [y]:
Standard MIB Access [y]:
Successfully modified community.
Syntax
• community
• no community
• show community
Related com-
mand(s)
edit snmp username – edit an existing SNMPv3 username.
NOTE:
When you execute the edit snmp username command, the system prompts you to
provide the new SNMPv3 username information.
hostname (config)# edit snmp username <username>
Username [CompanyV3]:
Security Level:
1: noAuth, noPriv
2: auth, noPriv
3: auth, priv
Enter a number (1 - 3) [3]:
Auth Protocol:
1: None
2: MD5
3: SHA
Enter a number (1 - 3) [2]:
Auth Password [********]:
Priv Password [********]:
MIB Access:
Enterprise [y]:
Standard [y]:
Syntax
• show snmp username
• snmp username
• no snmp username
Related com-
mand(s)
edit station – edit an SNMP management station.
Using the Command Line Interface 312