HP Latex 210 Printer - Manual (Page 28)

2. Lift the spindle lock lever to disengage the spindle.
3. Remove the first end of the spindle from the right side of the printer, then move the spindle to the
right in order to extract the other end. Do not insert your fingers into the spindle supports during
the removal process.
The spindle has a stop at each end to keep the roll in position. Remove the blue stop at the left end
to mount a new roll (the stop at the other end can also be removed, if you wish). The stop slides
along the spindle to hold rolls of different widths.
4. Slide the lever-lock on the blue stop to the unlocked position.
24 Chapter 4 Handle the substrate ENWW
Handle the substrate