HP Latex 210 Printer - Manual (Page 9)

The printer’s main features
Your printer is a color inkjet printer designed for printing high-quality images on flexible substrates from
0.584 m (23 in) to 1.55 m (61 in) wide. Some major features of the printer are shown below:
● Printing speeds in draft mode of up to 22.8 m²/h (246 ft²/h).
● Environmentally friendly, odorless, aqueous latex inks in six colors
● No special ventilation required, no hazardous waste
● 775 ml ink cartridges
● Print on a wide range of substrates—including most low-cost, uncoated, solvent-compatible
substrates
● A range of HP recyclable substrates is available
● Durable prints with outdoor display permanence up to three years unlaminated, five years
laminated
● Accurate and consistent color reproduction with automatic color calibration (built-in
spectrophotometer) for most substrates
To send print jobs to your printer, you will need Raster Image Processor (RIP) software, which should be
run on a separate computer. RIP software is available from various different companies; it is not
provided with the printer.
The printer’s main components
The following views of the printer illustrate its main components.
ENWW The printer’s main features 5
In
tr
od
u
ctio
n