HP Latex 210 Printer User Manual
Page 30
8.
The right stop of the spindle has two positions: one for rolls of the printer's maximum width, and
another for narrower rolls. Remember to use the second position for narrower rolls, which
improves the drying process and allows higher printing speeds.
9.
Put the blue stop on to the upper end of the spindle, and push it towards the end of the roll.
TIP:
If the cardboard core of the substrate is longer than the substrate, you can load the
substrate without inserting the blue stop, but care should be taken when unloading the substrate,
as the loading/unloading table is designed to be used with the blue stop in place.
TIP:
When loading a roll that is 1549 mm (61 in) wide, you may find it easier to load without
stops (remove both stops).
10.
Slide the lever-lock to the locked position.
26
Chapter 4 Handle the substrate
ENWW
Handle the substrate