HP Color LaserJet 4650 Printer series - Manual (Page 121)

5. Press to highlight a JOB NAME.
6. Press to select the JOB NAME.
PRINT is highlighted.
7. Press to select PRINT.
8. Press or to select the first digit of the PIN.
9. Press to select the digit. The number changes to an asterisk.
10. Repeat steps 8 and 9 for the remaining three digits of the PIN.
11. Press when finished entering the PIN.
12. Press or to select the number of copies.
13. Press to print the job.
Deleting a private job
A private job can be deleted from the printer control panel. You can delete a job without
printing it, or IT WILL BE AUTOMATICALLY DELETED after it is printed.
1. Press M
ENU
to enter MENUS.
RETRIEVE JOB is highlighted.
2. Press to select RETRIEVE JOB.
3. Press to highlight your USER NAME.
4. Press to select your USER NAME.
5. Press to highlight a JOB NAME.
6. Press to select the JOB NAME.
7. Press to highlight DELETE.
8. Press to select DELETE.
9. Press or to select the first digit of the PIN.
10. Press to select the digit. The number changes to an asterisk.
11. Repeat steps 9 and 10 for the remaining three digits of the PIN.
12. Press when finished entering PIN.
13. Press to delete the job.
Mopier mode
When Mopier Mode is enabled, the printer produces multiple, collated copies from a single
print job. Multiple-original printing (mopying) increases printer performance and reduces
network traffic by sending the job to the printer once, then storing it in the printer’s RAM. The
remainder of the copies are printed at the printer’s fastest speed. All documents can be
created, controlled, managed, and finished from the desktop, which eliminates the extra step
of using a photocopier.
The HP Color LaserJet 4650 series printers support the mopying feature, provided they have
enough total memory (at least 192 MB of total memory: 160 MB DDR plus 32 MB on the
formatter board), and the mopying feature is enabled by default if the Mopier Mode setting
is Enabled in the Device Settings tab.
ENWW Job storage features 107