HP Color LaserJet 4650 Printer series - Manual (Page 56)

Configure device menu
The configure device menu allows you to change the printer’s default printing settings, adjust
the print quality, change the system’s configuration and I/O options, and reset the printer’s
default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the
properties and override the values set from this menu. This menu can also be used to set
default media size and type.
Menu item Values Description
COPIES 1-32000 Allows you to set the default
number of copies. The default
number is 1.
DEFAULT PAPER SIZE A list of available sizes
appears. Allows you to set the default
media size.
DEFAULT CUSTOM PAPER SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows you to set the default
size for any job without
dimensions.
DUPLEX OFF
ON
Allows you to enable or disable
the duplex function on models
with duplexing capability. The
default is OFF.
DUPLEX BINDING LONG EDGE
SHORT EDGE
This item appears only if the
printer has a duplex unit and if
DUPLEX is set to ON. It allows
you to choose the edge of the
paper to use for binding duplex
jobs.
OVERRIDE A4/LETTER NO
YES
Allows you to set the printer to
print an A4 job on letter-size
paper when no A4 paper is
loaded. The default is NO.
MANUAL FEED OFF
ON
Allows you to manually feed
media. The default is OFF.
COURIER FONT REGULAR
DARK
Allows you to select a version
of the Courier font. The default
is REGULAR.
WIDE A4 NO
YES
Allows you to change the
printable area of A4 paper so
that eighty 10-pitch characters
may be printed on a single line.
The default is NO.
42 Chapter 2 Control panel ENWW