HP Color LaserJet 4650 Printer series - Manual (Page 263)

Declaration of Conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Development Company
Manufacturer’s Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product
Product Name: HP Color LaserJet 4650/4650n/4650dn/4650dtn/4650hdn
Regulatory Model Number 4 : BOISB-0304-00
Including
Q3673A - Optional 500-Sheet Input Tray
Q3674A - Optional 2 x 500-Sheet Input Tray
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 60950:1999 / EN60950:2000
IEC 60825-1:1993 +A1:1997 +A2:2001 / EN60825-1:1994 +A11:1996 +A2:2001 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1997 / EN 55022:1998 Class B 1, 3
EN 61000-3-2:1995 / A14
EN 61000-3-3:1995 / A1
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B
2 / ICES-003, Issue 3
GB9254-1998, GB17625.1-1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries
the CE-Marking accordingly:
1 The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2 This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3 The product includes LAN (Local Area Network) options. When the interface cable is attached to LAN connectors, the product meets the
requirements of EN55022 Class A in which case the following applies: "Warning - This is a class A product. In a domestic environment, this
product may cause radio interference, in which case the user may be required to take adequate measures".
4 For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or
the product number(s).
Boise, Idaho 83714-1021, USA
29 January, 2004
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia, Ltd. 31-41 Joseph Street Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE/Standards
Europe Herrenberger Straße 140 Böblingen, D-71034, Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Relations Manager, Hewlett-Packard Company PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA
(Phone: 208-396-6000)
ENWW Declaration of Conformity 249