Selecting print media, Media to avoid, Paper that can damage the printer – HP Color LaserJet 4650 Printer series User Manual
Page 92: Media to avoid paper that can damage the printer
Selecting print media
You can use many types of paper and other print media with this printer. This section
provides guidelines and specifications for selecting and using different print media. For more
information about supported print media, see
Before purchasing any media or specialized forms in quantity, verify that your paper supplier
obtains and understands the print media requirements specified in the HP LaserJet Family
Print Media Guide.
for HP LaserJet Family Print Media Guide ordering
information. To download a copy of the HP LaserJet Family Print Media Guide, go to
It is possible that media could meet all of the guidelines in this chapter and still not print
satisfactorily. This may be due to abnormal characteristics of the printing environment or to
other variables over which Hewlett-Packard has no control (for example, extremes in
temperature and humidity).
Hewlett-Packard recommends testing any media before buying it in large quantities.
CAUTION
Using media that does not conform to the specifications listed here or in the paper
specification guide can cause problems that require service. This service is not covered by
the Hewlett-Packard warranty or service agreements.
Media to avoid
This printer can handle many types of media. Use of media outside the printer’s
specifications will cause a loss of print quality and increase the chance of paper jams.
●
Do not use paper that is too rough.
●
Do not use paper with cutouts or perforations other than standard 3-hole punched paper.
●
Do not use multipart forms.
●
Do not use paper that has already been printed on or that has been fed through a
photocopier.
●
Do not use paper with a watermark if you are printing solid patterns.
Paper that can damage the printer
In rare circumstances, paper can damage the printer. Avoid the following paper to prevent
possible damage to the printer:
●
Do not use paper with staples attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers,
or transparencies designed for monochrome printing. Use only transparencies that are
specified for use with HP Color LaserJet printers.
●
Do not use photo paper intended for inkjet printers.
●
Do not use paper that is embossed or coated and is not designed for the temperatures
of the image fuser. Select media that can tolerate temperatures of 190° C (374° F) for
0.1 second.
78
Chapter 4 Printing tasks
ENWW