HP Color LaserJet 4650 Printer series - Manual (Page 98)

Loading Tray 1
CAUTION To avoid jams, never add or remove paper from Tray 1 during printing.
1. Open Tray 1.
2. Set the side guides to the desired width.
3. Load paper in the tray with the side to be printed on facing down.
Note For best performance, load the tray completely full without splitting the ream of paper.
Splitting the ream might cause a multi-feed problem, which could result in a paper jam. The
capacity of the paper tray can vary. For example, if you are using 75 g/m
2 (20 lb) paper, the
tray holds a full ream of 500 sheets. If the media is heavier than 75 g/m 2 (20 lb), the tray will
not hold a full ream, and you must reduce the number of sheets accordingly. Do not overfill
the tray because the printer might not pick up the paper.
Note If you are duplex printing, see Two-sided (duplex) printing for loading instructions.
84 Chapter 4 Printing tasks ENWW