Replacing supplies, Locating supplies, Supply replacement guidelines – HP Color LaserJet 4650 Printer series User Manual
Page 151: Locating supplies supply replacement guidelines
Replacing supplies
When you use genuine HP supplies, the printer automatically notifies you when supplies are
nearly depleted. The notification to order supplies allows ample time to order new supplies
before they need to be replaced.
Locating supplies
Supplies are identified by their labeling and their blue plastic handles.
The following figure illustrates the location of each supply item.
Supply item locations
1
fuser
2
print cartridges
3
transfer unit
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting
up the printer.
●
Sufficient space is required above and in the front of the printer for removing supplies.
●
The printer should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply
. When you connect, select
Solve a Problem.
CAUTION
Hewlett-Packard recommends the use of Genuine HP products in this printer. Use of non-HP
products may cause problems requiring service that is not covered by the Hewlett-Packard
warranty or service agreements.
ENWW
Replacing supplies
137