Staple documents – HP LaserJet M2727 Multifunction Printer series User Manual
Page 167
Use the convenience stapler (HP LaserJet M2727nfs mfp
only)
Staple documents
Activate the stapling mechanism by inserting media into the convenience stapler.
1.
Insert up to 20 sheets of media (80 g/m
2
or 20 lb) into the slot in the stapler door. Insert fewer
sheets to staple if the media weight is heavier than 80 g/m
2
or 20 lb.
CAUTION:
Do not use the convenience stapler to staple plastic, cardboard, or wood. Damage
to the convenience stapler can result from attempting to staple these materials.
NOTE:
Exceeding the recommended capacity could result in jams or damage.
2.
Wait for the stapler to staple the sheets. When it is inserted all the way into the stapler slot, the
media should trigger the stapler mechanism.
3.
Remove the stapled media from the slot.
NOTE:
If you are unable to remove the media after stapling, carefully open the stapler door and
then slide your document out.
ENWW
Use the convenience stapler (HP LaserJet M2727nfs mfp only) 155