Enww solve image-quality problems 193 – HP LaserJet M2727 Multifunction Printer series User Manual
Page 205
Problem
Cause
Solution
The printed page is curled or
wavy.
The product is not set to print on the type of
media on which you want to print.
In the printer driver, make sure the
appropriate media type is selected.
If the problem persists, select a media type
that uses a lower fuser temperature, such
as transparencies or light media.
The media might have been in the input tray
too long.
Turn over the stack of media in the tray.
Also, try rotating the media 180° in the input
tray.
The paper path is curling the media.
Open the rear output door to print to the
straight-through output path.
The media might not meet HP specifications. Use a different paper, such as high-quality
paper that is intended for laser printers. See
Paper and print media on page 45
.
Both high temperature and humidity can
cause paper curl.
Check the product environment.
Text or graphics are skewed on
the printed page.
The media might be loaded incorrectly or the
input tray might be too full.
Verify that the media is loaded correctly and
that the media guides are not too tight or too
loose against the stack. See
The media might not meet HP specifications. Use a different paper, such as high-quality
paper that is intended for laser printers. See
Paper and print media on page 45
.
The printed page contains
wrinkles or creases.
The media might be loaded incorrectly or the
input tray might be too full.
Turn over the stack of paper in the input tray,
or try rotating the paper 180° in the input
tray.
Verify that the media is loaded correctly and
that the media guides are not too tight or too
loose against the stack. See
The media might not meet HP specifications. Use a different paper, such as high-quality
paper that is intended for laser printers. See
Paper and print media on page 45
.
The paper path is curling the media.
Open the rear output door to print to the
straight-through output path.
Air pockets inside envelopes can cause them
to wrinkle.
Remove the envelope, flatten it, and try
printing again.
ENWW
Solve image-quality problems 193