Print on both sides of the paper (duplex printing), Use automatic duplex printing, Print on both sides manually – HP LaserJet M2727 Multifunction Printer series User Manual
Page 75
Print on both sides of the paper (duplex printing)
Use automatic duplex printing
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper with the front side up, bottom-edge first.
●
For all other trays, load the letterhead paper with front side down, and the top edge at the
back of the tray.
CAUTION:
To avoid jams, do not load paper that is heavier than 105 g/m
2
(28 lb bond).
2.
On the File menu in the software program, click Print.
3.
Select the driver, and then click Properties or Preferences.
4.
On the Finishing tab, click Print on both sides.
●
If necessary, select Flip pages up to change the manner in which pages are turned, or select
a binding option in the Booklet layout list box.
5.
Click OK.
Print on both sides manually
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper with the front side down, bottom-edge first.
●
For all other trays, load letterhead paper with front side up, and the top edge at the back of
the tray.
CAUTION:
To avoid jams, do not load paper that is heavier than 105 g/m
2
(28 lb bond).
2.
On the File menu in the software program, click Print.
3.
Select the driver, and then click Properties or Preferences.
4.
On the Finishing tab, select Correct order for straight paper path, select Print on both sides
(manually), and then open the rear output bin door.
5.
Click OK.
6.
Send the print job to the product. Follow the instructions in the pop-up window that appears before
feeding the output stack into tray 1 for printing the second half.
7.
Go to the product. Remove any blank paper that is in tray 1. Insert the printed stack with the printed
side up, and the bottom-edge feeding into the product first. You must print the second side from
tray 1.
8.
At the control panel, press
OK
to continue.
ENWW
Print on both sides of the paper (duplex printing)
63