HP LaserJet M2727 Multifunction Printer series - Manual (Page 94)

Load originals for scanning
Automatic document feeder (ADF)
NOTE: The ADF capacity is up to 50 sheets of 80 g/m 2 or 20 lb media.
CAUTION: To prevent damage to the product, do not use an original that contains correction tape,
correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals
into the ADF. Use the flatbed glass to scan these items.
1. Insert the top-end of the stack of originals into the ADF input tray, with the media stack face-up
and the first page to be copied on top of the stack.
If the media is longer than letter- or A4-sized paper, pull out the ADF input tray extension to support
the media.
2. Slide the stack into the ADF until it does not move any farther.
Document loaded appears on the control-panel display.
3. Adjust the media guides until they are snug against the media.
Flatbed scanner
NOTE: The maximum media size for flatbed scanning is letter. For media larger than letter, use the
ADF.
1. Make sure that the automatic document feeder (ADF) contains no media.
2. Lift the flatbed scanner cover.
82 Chapter 9 Scan ENWW