HP LaserJet M2727 Multifunction Printer series - Manual (Page 43)

NOTE: You do not have to have Internet access to open and use Macintosh Configure Device.
View Macintosh Configure Device when the product is directly connected to the computer
1. Open HP Director by clicking the HP Director icon in the dock.
2. In HP Director, click Settings.
3. Select Configure device to open the Macintosh Configure Device home page in a browser.
View Macintosh Configure Device when the product is connected to a network
1. Open one of the following supported Web browsers:
● Safari 1.2 or later
● Microsoft Internet Explorer 5.0 or later
● Netscape Navigator 4.75 or later
● Opera 6.05 or later
2. Enter the IP address of the product into the Web browser to open the Macintosh Configure Device
home page.
ENWW Software for Macintosh 31