HP LaserJet M2727 Multifunction Printer series - Manual (Page 49)

5 Connectivity
● Connect the product directly to a computer with USB
● Printer sharing disclaimer
● Supported network operating systems
● Supported network protocols
● Install the product on a network
● Configure the network product
NOTE: Configuring TCP/IP settings is complicated and should be performed only by experienced
network administrators. BOOTP will require a server to configure specific TCP/IP settings for the
product. DHCP will also require a server, but the TCP/IP settings will not be fixed for the product. Finally,
the manual method to configure specific TCP/IP settings can be done from the control panel, the
embedded Web server, HP ToolboxFX, or HP Web Jetadmin. For additional help or network
configuration, contact your network provider.
ENWW 37