Rear (face-up) output bin – HP LaserJet M2727 Multifunction Printer series User Manual
Page 198
Advertising
Rear (face-up) output bin
CAUTION:
Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.
1.
Open the straight-through output door.
2.
Pull down the green pressure-release levers.
3.
With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the printer.
NOTE:
If you cannot grasp the media with your hands, perform the procedure in
the print-cartridge area on page 187
4.
Close the straight-through output door.
186 Chapter 12 Problem solve
ENWW
Advertising