GE JB850EFES - Manual (Page 11)

To Set the Kitchen Timer
Touch the TIMER ON pad.
Touch the number pads until the amount
of time you want shows in the display. For
example, to set 2 hours and 45 minutes,
touch 2, 4 and 5 in that order. If you make
a mistake, touch the TIMER OFF pad and
begin again.
Touch the START pad.
After touching the START pad, SET
disappears; this tells you the time is counting
down, although the display does not change
until one minute has passed. Seconds will not
be shown in the display until the last minute is
counting down.
When the kitchen timer reaches :00, the
control will beep 3 times followed by one
beep every 6 seconds until the TIMER OFF
pad is touched.
The 6-second tone can be cancelled by
following the steps in the Special features of
your oven control section under Tones at the
End of a Timed Cycle.
The Kitchen Timer is in hours and
minutes.
The Kitchen Timer does not control oven
operations. The maximum setting on the
Kitchen Timer is 9 hours and 59 minutes.
To Reset the Kitchen Timer
How to Lock Out the Controls (on some models)
To Set the Clock
If the display is still showing the time remaining,
you may change it by touching the TIMER ON
pad, then touching the number pads so that the
time you want appears in the display.
If the remaining time is not in the display (clock,
delay start or cooking time are in the display),
recall the remaining time by touching the
TIMER ON pad and then touch the number
pads to enter the new time you want.
Control Lockout will allow you to lock out the
touch pads so they cannot be activated when
touched. Some models have Range Lockout
which will also disable the surface units. Make
sure all surface unit controls are turned off
when using Range Lockout. Any surface unit
that is set to an “on” position while the Range
Lockout is enabled will automatically come on
after the Range Lockout is disabled.
To lock/unlock the controls:
Touch and hold the Control Lockout or
Range Lockout pad for 3 seconds. For
some models, you have to touch and hold
the 9 and 0 pads at the same time for 3
seconds. A light will turn on indicating the
controls are locked out.
To unlock the control, Touch and hold the
Control Lockout or Range Lockout pad
for 3 seconds. For some models, you have
to touch and hold the 9 and 0 pads at the
same time for 3 seconds. The light will
turn off indicating the controls are
unlocked.
When this feature is on, the touch pads will not
respond except for the Clear/Off pad.
■ The adjustment will be retained in memory
after a power failure.
The clock must be set to the correct time of day
for the Delay Start functions to work properly.
The time of day cannot be changed during
a delayed cooking or a delayed self-cleaning
cycle.
Touch the CLOCK pad.
Touch the number pads until the correct
time of day is shown in the display. If the
number pads are not touched within one
minute after you touch the CLOCK pad,
the display reverts to the original setting. If
this happens, touch the CLOCK pad and
enter the time of day.
Touch the START pad until the time of day
shows in the display. This enters the time
and starts the clock.
To check the time of day when the display is
showing other information, touch the CLOCK
pad. The time of day shows until another pad
is touched. To change the time format or turn
off the clock display, see the Special Features
section.
To Cancel the Kitchen Timer
Touch the TIMER OFF pad.
Using the clock, kitchen timer, and control lockout.
GEAppliances.com
OR
11