Special features of your oven control – GE JB850EFES User Manual

Page 25

Advertising
background image

Special features of your oven control.

GEAppliances.com

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use the Fahrenheit

temperature selections, but you may change this

to use the Celsius selections.

Touch the upper oven BROIL HI/LO and

BAKE pads at the same time until the display

shows SF.

Touch the COOK TIME and BROIL HI/LO

pads at the same time. The display will show

F (Fahrenheit).

Touch the COOK TIME and BROIL HI/LO

pads again at the same time. The display will

show C (Celsius).

Touch the START pad.

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will

sound followed by one beep every 6 seconds

until the CLEAR/OFF pad is touched. This

continual 6-second beep may be cancelled.
To cancel the 6-second beep:

Touch the upper oven BROIL HI/LO and

BAKE pads at the same time until the

display shows SF.

Touch the BROIL pad. The display shows

CON BEEP (continuous beep). Touch the

BROIL pad again. The display shows BEEP.

(This cancels the one beep every 6 seconds.)

Touch the START pad.

Your new touch pad control has additional features that you may choose to use. The following are the features and how

you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s

memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads at the same

time. The lower oven BROIL HI/LO and BAKE pads will not activate special features.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power

failure, except for the Sabbath feature, which will have to be reset.

Tone Volume

This feature allows you to adjust the tone

volumes to a more acceptable volume. There

are three possible volume levels.

Touch the upper oven BROIL HI/LO and

BAKE pads at the same time until the

display shows SF.

Touch the COOK TIME pad. The display will

show STD BEEP. This is the middle volume

level.

Touch the COOK TIME pad again. This

changes the volume level each time the

pad is touched, and a tone will sound to

provide an indication of the volume level.

Choose the desired sound level (LO BEEP,

STD BEEP, HI BEEP, or OFF).

Touch the START pad to activate the level

shown.

25

Preheat Notification Lighting

This feature will turn on the oven light when

the oven has reached the set temperature.

The oven light will remain on until the oven

is turned off or if the Oven Light pad is

pushed. Press the Oven Light pad to view

the current setting, press again to change

the setting.

Advertising