Installation instructions – GE ZV925SLSS User Manual
Page 19
19
Installation Instructions
STEP 4 INSTALL UPPER SUPPORT FRAME
• Raise the upper support
toward the ceiling.
• Thread the house wiring
through one of the large
holes, preferably on the
left side.
• Carefully engage the
ceiling mounting screws
to the keyhole slots in
the top of the frame.
• Tighten the 4 mounting
screws against the frame.
• Install 2 safety screws.
• Slide air deflector into
the support frame.
• Secure the deflector
to the support with
4 screws.
• Install the duct
piece to the
bottom of the
deflector and seal
the connection
with duct tape.
Safety
screws
Keyhole
slots
House
wiring
Keyhole
slots
,167$//$7,21³5(&,5&8/$7,1*
STEP 3 INSTALL AIR DEFLECTOR,
CUT DUCT FOR RECIRCULATING
OPERATION
FRONT
• Temporarily, slide the
air deflector into the
support frame.
FRONT
• Measure duct length
between the deflector and
over the exhaust opening.
• Cut duct piece to length
and set aside.
Duct
length